RGB LED Pool Light

Shenzhen HOTOOK Industrial Co., Ltd. is one of the leading manufacturers and suppliers of rgb led pool light in China, also supports customized service. Welcome to buy discount rgb led pool light for sale here from our factory. If you have any enquiry about quotation and free sample, please feel free to email us.

[Nicheless, casing pipe installation]: no traditional niche required; the light body threads or slots directly into the casing pipe, cutting installation labor for both new builds and renovation jobs.

[Two installation types in one series]: thread type for a screw fit connection, tube type for a push fit connection, so your installers can pick whichever matches the plumbing already run.

[True RGB color changing]: full color LED chips give smooth color transitions and stable output, not the flickering, uneven color you get from cheaper RGB pool lights.

[IP68 waterproof rating]: fully submersible, sealed housing keeps water and moisture out permanently, not just splash resistant.

[PC (polycarbonate) lens and housing]: impact resistant, UV stable, and won't yellow or go brittle after a season or two in chlorinated or salt water.

[Low voltage 12V AC/DC]: safe for wet area installation, meets the low voltage requirement most electrical codes call for around pool water.

[Works for concrete and fiberglass pools]: the same casing pipe fitting installs into a poured concrete wall or a fiberglass shell without a different part number.

[Certified for global export]: CE, RoHS, FCC marks mean the paperwork is already done for EU, UK and North American distributors.

Tube Type (Push Fit)

Set the casing pipe into the concrete formwork or fiberglass wall before pouring/laying, running the power cable through the pipe to the equipment room.

Once the wall is cured, slide the light body's tube fitting into the casing pipe until the mounting flange sits flush against the wall.

For concrete pools, the flange seats directly against the tiled or plastered finish. For fiberglass pools, a matching wall side fitting locks the connection from the opposite face.

Connect the cable to the junction box, test the light, then secure the flange screws.

Thread Type (Screw Fit)

Same casing pipe pre installation as above, but the light body screws directly into the threaded fitting inside the pipe.

Turn the light housing clockwise until it seats fully and the O ring compresses for a watertight seal.

Fiberglass pool installs use a threaded counterpart on the exterior wall face to lock the fixture in place from both sides.

Wire, test, and tighten the retaining flange.

Both methods are designed for a single technician to complete without special tools beyond a standard wrench, which keeps labor cost down on both new build and retrofit jobs.

[In house mold and PC housing production]: we control the material quality and wall thickness of every housing, so IP68 sealing performance stays consistent batch after batch, not just on the sample unit.

[Real casing pipe compatibility testing]: every thread type and tube type fitting is tested against standard casing pipe dimensions used in North American and European pool construction, so distributors don't get compatibility complaints after the container lands.

[Full color spectrum RGB control at the factory level]: our RGB LED pool lights are calibrated for even color mixing, not just a raw RGB chip soldered onto a board.

[Certification support]: CE, RoHS, FCC documentation is ready to hand over for your import paperwork, and we can support additional country specific testing on request.

[OEM/ODM and flexible MOQ]: whether you need private labeling, custom packaging, or a smaller trial order before a full container, our sales team has handled that conversation many times and can work within it.

[One Stop Pool Solution]: beyond pool lights, we manufacture salt chlorinators, sand filters and related pool equipment, so distributors can consolidate sourcing with one supplier instead of managing five.

Q: What's the difference between thread type and tube type installation?
A: Thread type screws into the casing pipe fitting, giving a mechanically locked connection - often preferred where the fixture may need to be removed for servicing. Tube type is a push fit connection, generally faster to install during new construction. Both achieve the same IP68 seal when installed correctly.

Q: Can this RGB LED pool light be retrofitted into an existing pool?
A: Yes, as long as a casing pipe (or a niche that can accept the casing pipe fitting) is present or can be installed. For pools with an existing traditional niche, ask our sales team about adapter options.

Q: Does the RGB version support color changing modes, or just fixed colors?
A: The RGB models support smooth color transitions and multiple lighting modes. Static CW (cool white) and WW (warm white) versions are also available if your customer just wants a clean, single tone light.

Q: Is 12V AC/DC safe for residential use, and does it need a transformer?
A: Yes - 12V is the standard low voltage requirement for underwater pool lighting in most electrical codes. A transformer (step down from mains voltage) is required and should be installed in a dry, ventilated equipment area, not poolside.

Q: What's the typical lead time for a bulk order?
A: Lead times depend on order volume and color mix, but as an established manufacturer we keep core components in stock for the more common configurations (230mm CW/WW) to shorten turnaround on standard orders. RGB and custom color runs may need a slightly longer production slot - our team can confirm exact timing against your PO.

Hot Tags: rgb led pool light, China rgb led pool light manufacturers, suppliers, factory