IP68 Pool Light

Shenzhen HOTOOK Industrial Co., Ltd. is one of the leading manufacturers and suppliers of ip68 pool light in China, also supports customized service. Welcome to buy discount ip68 pool light for sale here from our factory. If you have any enquiry about quotation and free sample, please feel free to email us.

[True IP68 Waterproof Rating]: Fully submersible, sealed against water ingress at rated depth, verified for continuous underwater use (not IP65/IP67 splash only).

[SS316 Stainless Steel + Resin Filled Construction]: Corrosion resistant in chlorinated and saltwater pools; resin filling prevents moisture penetration into the LED chamber.

[DC12V Low Voltage Operation]: Safe for wet environments, standard for pool lighting circuits.

[SMD2835 LED Chip, 100lm/W Efficiency]: High lumen output per watt, energy saving compared to halogen pool lights.

[120° Beam Angle Even light spread across the pool floor and walls, reduces dark spots.

[Multiple Sizes for Direct Replacement]: Ø96mm / Ø155mm / Ø257mm niches cover most existing pool light housings on the market.

[Power Options from 10W to 35W]: Matched to pool size, from small spas to large commercial pools.

[CW / WW / Red / Green / Blue / RGB Options]: RGB version supports color changing effects (requires external controller, 4 wire connection).

[Certified Compliance] CE, RoHS, FCC certified for import compliance in EU, UK, and US markets.

[Confirm niche compatibility]: Measure the existing niche diameter (96mm / 155mm / 257mm) before ordering to ensure direct fit.

[Power off and isolate the circuit]: Always disconnect the transformer/power supply before installation or maintenance.

[Remove the old fixture]: Unscrew the retaining screws, disconnect wiring, and pull the old light out of the niche.

[Check the gasket and cable gland]: Inspect the O ring/gasket on the new IP68 pool light; a compromised seal is the most common cause of water ingress failure.

[Route and connect wiring]: For standard CW/WW models, connect 2 wire DC12V leads; for RGB models, connect all 4 wires to the external controller per polarity marking.

[Seat the light into the niche]: Fit the light flush against the niche wall, secure with mounting screws.

[Test before refilling]: Power on and verify function while the niche is still accessible, before the pool is refilled with water.

[Refill and final check]: Once confirmed working, refill the pool and do a final leak/function check after 24 hours.

Q1: What does IP68 actually mean for a pool light?

A: IP68 means the fixture is fully protected against dust ingress and can be continuously submerged in water beyond 1 meter depth without failure, as opposed to IP65 (splash proof only) or IP67 (temporary immersion). This IP68 pool light is designed for permanent underwater installation.

Q2: Can I install this IP68 pool light in a saltwater pool?

A: Yes. The SS316 stainless steel housing is resistant to chlorine and salt chlorinated pool environments, making it suitable for both freshwater and saltwater pools.

Q3: What's the difference between the 96mm, 155mm, and 257mm versions?

A: The diameter must match your existing pool light niche. 96mm suits compact fixtures, 155mm is a common European standard size, and 257mm is used for larger commercial or high output installations.

Q4: Do I need a controller for the RGB version?

A: Yes. RGB models use a 4-wire connection and require an external RGB controller to switch or fade colors; this is not built into the light itself.

Q5: Can this pool light run on standard household voltage?

A: No. It operates on DC12V low voltage for safety in wet environments. A compatible 12V transformer/power supply is required.

Q6: How long does this IP68 pool light typically last?

A: With SMD2835 LEDs rated at 100lm/W and resin-filled sealing, typical service life under normal pool chemical conditions is several years of daily use, though actual lifespan depends on water chemistry and installation quality.

Q7: Is this pool light suitable for both new builds and retrofits?

A: Yes. Because it's offered in three standard niche sizes, it works for new pool construction and as a direct replacement for aging halogen or older LED pool lights.

Hot Tags: ip68 pool light, China ip68 pool light manufacturers, suppliers, factory, 12v swimming pool lights, Casing Pipe LED Pool Light, fiber optic lighting for home theater, ip65 swimming pool lights, light up flamingo pool float, waterproof string lights for pool